Double Layer Invert Box Roof Wall Panel Roll Forming Machine
Components for the Machine:
The roll forming machine consists of 5-ton manual uncoiler, infeed guide, fixed position driven forming stations, cutting equipment, hydraulic station, PLC control console, pre-cutter, safety cover, and manual unload product run out table.
Technical Parameters
| Material |
galvanized steel, pre-painted steel, and aluminum. |
| Thickness |
From 0.3 mm to 0.7mm. |
| Main Motor Power |
7.5 kw. |
| Hydraulic Power |
3 kw. |
| Feeding Width |
1000/1200mm. |
| Cover Width |
835/1002mm and 800/1000mm. |
| Yield Stress |
235Mpa (33KSI) ~ 350Mpa (50KSI). |
| Total Speed |
20 m/minute for trapezoidal profile; 5m/minute for tile profile. |
| Cutting Tolerance |
+/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm). |
| Manual Uncoiler |
capacity is 5 tons. |
| Coil Inner Diameter |
508mm or 610mm. |
| Voltage |
380V, 3 phase, 50 HZ, or customized. |
| Numbers of Station |
17~18 stations. |
| Type of Cutting |
roll-formed and length-set profile cutting. |
2. Material of Main Equipment:
| Roller Material |
High grade S45C forged steel, coated with hard chrome. |
| Active Shaft Material |
High grade S45C carbon wrought steel, diameter 80mm. |
| Electric Elements |
PLC control console, touch screen and transducer,
from Siemens, Germany. It has data storage function.
Other electrical parts, from Schneider Electric, Germany. |
| Cutter Blades |
Cr12MoV steel with quenched treatment, hardness HRC58~61,
wear-resistance, good steel structure, long life. |
Process Sketch
Uncoiling the sheet -Pre-cut -Material feeding ðRoll forming - Measure the length -Cutting the panel -Panels running out to the supporter (optional: automatic stacker)
Packaging & Shipping
1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film;
3.Spare parts and some small parts packed in plastic tooling box;
4.All Components Fixed by steel wire with Container.
FAQ
Q:Are you a manufacturer?
A:Yes absolutely. Welcome a lot for your visiting to us.
Q:What's the delivery time?
A:Normaly will take 60days
Q:Do you have after-sale support?
A:Yes, we're always here for giving you advice and support for technical details since we have senior technician.
Q:Is there quality control when manufacturing the lines?
A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.
Q:What's your strength comparing to the other supplier?
A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.
Audited Supplier 
){kind=link}