• EPS Sandwich Panel Production Machine
  • EPS Sandwich Panel Production Machine
  • EPS Sandwich Panel Production Machine
  • EPS Sandwich Panel Production Machine
  • EPS Sandwich Panel Production Machine

EPS Sandwich Panel Production Machine

Automatic Grade: Automatic
Power Source: Electric
Screw Design: Double-Screw
Certification: ISO9001, SGS
Condition: New
Customized: Customized
Customization:

Contact Supplier

Diamond Member Since 2006

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company

Basic Info.

Model NO.
WLFM
Voltage
380 Volts AC. 3 Phase
Frequency
60 Hz
Current
130A
Power
About 45kw
Pressure
550 to 700 Kpa
Solidify
1.2 M3 /Min
Panel and Profile
See Attachment.
Top Coil
0.5-0.6mm, 280MPa
Lower Coil
0.5-.06mm, 280MPa
Laminating Speed
at 1-3m/Min
Transport Package
Wooden Cases
Specification
CE& ISO9001
Trademark
WILLINGIN′T
Origin
China
Production Capacity
20set/Mouth

Product Description

Brief  Introduction 
wl-eps laminator for corrugated sandwich panel is a integrated production line consisting of a  roll forming machine and a sandwich penal laminating system. The roll forming machine and the laminating system can be operated separately. The roll forming machine is consists of uncoiler, main body. The laminating system is consists of feeding, glue, heating, laminating and post-cutting.
The whole machine is under control of PLC.
The line can produce single corrugated sheet, and can also laminate the sandwich panel with EPS.
The suitable material is colored galvanized steel sheet with height 0.4-0.6mm,the inserted material is EPS.
 

   Components and Functions
Standard DecoilersFor use with 1200±5 mm wide steel coil sheet up to 5 tons in weight. The coil holder is supplied with two supporting wood and expanding mandrels. It is un-powered.
The Max. outer diameter is 1260mm,the inner diameter is 500mm or 600mm.
Hydraulic StationTo supply the power for cutting, it is off work when the cutting stop
Consecutive Laminating BodyConsists of guiding, laminating, glue providing, glue scraping, heating, auto cutting and controlling.  
Coil Guiding equipmentWhen the coil sheet come the laminator, the guiding system ensures the sheet to the correct position.
Pre-heating systemBefore glue scraping, the coil sheet will be heated in this system.
Guiding roller coreWhen the EPS fed to the machine, the guiding roller will guide the EPS to the laminating cabinet, the roller core will go the cabinet too. This makes the EPS closer to the top and lower coil sheet, thus make the finished panel more solid.
Glue ProvidingThere are 4 drum stand, with proportion at 60:40 ( the glue is provided by the buyer, and the quality shall be meet the speed at 3-4 meters per minute). The glue will scraping at 4 directions,  this guarantees the glue can be supplied at different speed.
This part is operated separately.
Glue Filling PadThe pad is in to-and-fro movement, there are air cushions on the concrete pad.
HeaterTo open the heating pipe or not and how many pipes to open, is depend on the temperature and the solidify time of glue. The heater is to heat the top and lower coil sheet at appropriate temperature in laminating
Cutting system ( for laminating use )In production, when the sandwich panel meet the set length, the system will cut the panel with milling cutter. (also  equipped with another set of straight cutter)
PLC Control SystemMain components imported from Mitsubishi. All language in English.
Supporting TableThe finished panel will come out to the table.
Safety GuardAll the chains and sprockets are covered with a guard. this will prevent the workers from injured
C-shaped groove-making equipmentThis equipment is prepared for making the mineral wool sandwich panel
Groove-making equipment for EPSTo make the grooves of the EPS, make it possible for the buyer to produce the rabbet joint sandwich panel.
Edge cutting equipmentTo amend the edge of the EPS after the panels are laminated.

Working Flow

feed the lower coil sheet   ---- sheet guiding  ----- glue adding ----- feed the top coil sheet ------ sheet guiding ----- folding ----- g;lue adding-----feed EPS panel ------- add glue to EPS panel ----- upper and lower roller of the laminator tighten and roll ------- heating  -------  groove making------post cutting  (under control of  PLC, adopt encoder to meet the set length, automatic cutting) -------- sandwich panel come to the supporting table


Standard Equipment of Machine:
1Manual Uncoiler1set
2Infeed Guide1set
3Roll Forming Station1set
4Rectifying Device1set
5Post-cut Equipment1set
6Hydraulic Station1pc
7PLC Control Console1pc
8Product Support Table2pcs
9Spare Parts1box

We are a manufacturer in China
we can make the machine as per as your request.
About the machine,
we need you to provide us informaton,
1. profile drawing and size of product (model), 
2. steel thickness range,
3. coil width,
4. steel stress, 
5. requirements for configuration.

For price and other details, we welcome you to inquire us. 

Please Contact Miss. Lucy
 

Send your message to this supplier

*From:
*To:
avatar Mr. Wayne
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now