Steel Floor Decking Roll Forming Machine
Metal Floor Deck Roll Former
Deck Forming Machine
Steel Sheet Floor Deck Roll Former
1.Components of the Machine:
The roll forming machine consists of 8-ton manual uncoiler, infeed guide, fixed position driven forming stations, cutting equipment, hydraulic station, control console, and manual unload product run out table.
2.Technical Parameters:
Material specification |
Aluzinc steel and galvanized steel. |
Thickness |
0.8 mm to 1.5mm. |
Main motor power |
18.5 kw. |
Hydraulic station power |
4 kw. |
Yield stress |
235Mpa (33KSI) ~ 350Mpa (50KSI). |
Roll forming speed |
12 m/minute. |
Cutting tolerance |
+/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm). |
Manual uncoiler |
Max. Capacity: 8'000kgs. |
Voltage |
As per customer's request. |
Numbers of stations |
25 stations. |
Type of cutting |
Roll-formed and length-set profile cutting. |
3.Material of Main Equipment:
Roller Material |
High grade S45C forged steel, coated with hard chrome. |
Active Shaft Material |
High grade S45C carbon wrought steel, diameter 85mm. |
Electric Elements |
PLC control console, touch screen and transducer, from Mitsubishi, Japan.
Other elements, from Schneider Electric, Germany. |
Cutter blades |
Cr12MoV steel with quenched treatment, hardness HRC58~61,
wear-resistance, good steel structure, long life. |
5.Standard Equipment of Machine:
1) |
Manual Uncoiler |
1set |
2) |
Infeed Guide |
1set |
3) |
Roll Forming Station |
1set |
4) |
Post-cut Equipment |
1set |
5) |
Hydraulic Station |
1pc |
6) |
PLC Control Console |
1pc |
7) |
Product Support Table |
2pcs |
8) |
Spare Parts |
1box |
Process Sketch:
Uncoiling →Infeed guiding →Roll forming →Pressing→Measure Length&Shearing →Sheet to Support Table
Packaging & Shipping
1.One 20ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film;
3.Spare parts and some small parts packed in plastic tooling box;
4.All Components Fixed by steel wire with Container.
FAQ
Q:Are you a manufacturer?
A:Yes absolutely. Welcome a lot for your visiting to us.
Q:What's the delivery time?
A:Normaly will take 60days
Q:Do you have after-sale support?
A:Yes, we're always here for giving you advice and support for technical details since we have senior technician.
Q:Is there quality control when manufacturing the lines?
A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.