Components for the Machine:
The rollition driven forming stations, pressing die, cutting equipment, hydraulic station, PLC console and manual unload product run out table.
| Material specification |
Aluminum, alu-zinc, galvanized and pre-painted galvanized steel. |
| Thickness |
0.3-0.7mm.(perfect is 0.4mm-0.6mm) |
| Main motor power |
4kw |
| Hydraulic station power |
3kw. |
| Feeding width |
1200mm. |
| Cover width |
900mm |
| Yield stress |
235Mpa (33KSI) ~ 345Mpa (50KSI). |
| Roll forming Speed |
12 m/min |
| Cutting Tolerance |
+/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm). |
| Manual Uncoiler |
Max. Capacity: 5000kgs. |
| Coil inner diameter |
508mm. |
| Voltage |
380V,3 Phase,50HZ,Or As per customer's request. |
| Numbers of stands |
at least 17 stands/ stations |
| Type of cutting |
Roll-formed and length-set profile cutting. |
Material of Main Equipment:
| Roller Material |
High grade S45C forged steel, coated with hard chrome. |
| Active Shaft Material |
High grade S45C carbon wrought steel, diameter 76mm. |
| Electric Elements |
PLC control console, touch screen and transducer, from Siemens, Germany.
Other elements, from Schneider Electric, Germany. |
| Cutter Blades |
Cr12MoV steel with quenched treatment, hardness HRC58~61,
wear-resistance, good steel structure, long life. |
Process Sketch
Uncoiling the sheet -Infeed guiding -Roll forming -Measure length - Cutting the panel - Panels to the supporter (option: automatic stacker).
Packaging & Shipping
1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film;
3.Spare parts and some small parts packed in plastic tooling box;
4.All Components Fixed by steel wire with Container.
Audited Supplier 
){kind=link}
){kind=link}