C Purlin Roll Former Metal Cold Roll Forming Machine

• Warranty: 1 Year
• Certification: CE, SGS
• Customized: Customized
• Condition: New
• Control Type: Artificial
• Automatic Grade: Semi-Automatic
• Model NO.: Purlin Roll Former
• Type: C Purlin Roll Forming Machine
• Thickness: 1.5-3.0
• Material: Steel Strip
• Transport Package: Sea Worthy Fixed by Wire Rope, Wooden Blocks
• Specification: as required
• Trademark: WILLING INT′L
• Origin: China
• HS Code: 84552210
• Production Capacity: 20 sets/month

Product Description

C Purlin Roll Former Metal Cold Roll Forming Machine

Components for the Machine
The roll forming machine includes 4tons manual uncoiler unit, sheet guiding equipment, straightening device, pre-punching device, roll forming system, cutting equipment, hydraulic station, electric controlling system(PLC) and run out supporting table

 

Technical Parameters
 

Material specification	galvanized steel and carbon steel.
Thickness	2.0mm to 3.0mm.
Main Motor Power	15 kw.
Hydraulic Power	5.5 kw.
Web Width	Changeable.
Yield stress	235 Mpa~550Mpa
Roll Forming Speed	12 -15 m/minute.
Cutting Tolerance	+/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm).
Manual Uncoiler	Max. capacity: 4000kgs.
Coil Inner Diameter	508mm.
Voltage	380V, 3 phase, 50HZ; or as per customer's requirement.
Numbers of Stations	17 stations, with 4+5 straightening rollers.
Type of Cutting	Stop to Cutting, Post Cut, no blanking cut

 
Material of Main Equipment
 

Roller Material	GCr15 bearing steel, with quenching treatment.
Active Shaft Material	High grade S45C carbon wrought steel, diameter 80mm.
Electric Elements	PLC control console, touch screen and transducer, from Mitsubishi, Japan. Other elements, from Schneider, Germany.
Cutter Blades	Cr12MoV steel with quenched treatment, hardness HRC58~61, wear-resistance, good steel structure, long life.
Punching Die	Cr12 mold steel with quenching treatment.

Working Flow
Uncoiling---Sheet Guiding---Straightening & Levelling---Hole Punching---Measuring Length &Shearing---Roll Forming---Sheet to support table

Standard Equipment of Machine

1)	Manual Uncoiler, 4-ton	1 set
2)	Infeed Guide	1set
3)	Straightening Device	1set
4)	Hole Punching Device	1set
5)	Pre-cut Device	1set
6)	Roll Forming Station	1set
7)	Rectification Device	1set
8)	Hydraulic Station	1set
9)	PLC Control Console	1set
10)	Product Support Table	2 sets
11)	Other Spare Parts	1 box

Packaging & Shipping
1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film; 
3.Spare parts and some small parts packed in plastic tooling box; 
4.All Components Fixed by steel wire with Container.

FAQ

1. Q:Are you a manufacturer?
2. A:Yes absolutely. Welcome a lot for your visiting to us.

3. Q:What's the delivery time?

   A:Normaly will take 60days

4. Q:Do you have after-sale support?

   A:Yes, we're always here for giving you advice and support for technical details since we have senior technician. 

5. Q:Is there quality control when manufacturing the lines?

   A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.

6. Q:What's your strength comparing to the other supplier?

   A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.