Z Shaped Purlin Cold Roll Former

• Customization: Available
• Condition: New
• Customized: Customized
• Model NO.: WLZM
• Application: Industry
• Type: Stainless Steel Pipe Mill Line
• Material Spec: Galvanized Steel and Carbon Steel
• Thickness: From 2.0 mm to 2.5mm
• Electric Elements: PLC
• Main Otor Power: 15 Kw
• Hydraulic Station Powe: 5.5 Kw
• Roll Forming Speed: 12~15 M/Min
• Hydraulic Uncoiler: Max. Capacity Is 4 Tons
• Coil Inner Diameter: 508mm
• Type of Cutting: Stop to Cutting, Post Cut, No Blanking Cut
• Voltage: 1380V, 3phase, 60Hz
• Specification: CE Standard, ISO9001
• Trademark: WILLING INT
• Origin: China
• Production Capacity: 150 Sets Per Year

Product Description

• High Quality Z Shape Steel  Roll Forming Machine
  
  1. Components for the sheet profiling machine
  The roll forming machine includes 4tons manual uncoiler unit, sheet guiding equipment, straightening device, pre-punching device, roll forming system, cutting equipment, hydraulic station, electric controlling system(PLC) and run out supporting table.
• 2. Technical Parameters

• Material specification	galvanized steel and carbon steel.
  Thickness	2.0mm to 2.5mm.
  Main Motor Power	15 kw.
  Hydraulic Power	5.5 kw.
  Web Width	Changeable
  Yield stress	235Mpa (33KSI) ~ 550Mpa (50KSI).
  Roll Forming Speed	12~15 m/minute.
  Line speed	7~8m/min. (including punching and cutting time)
  Manual Uncoiler	Max. capacity: 4000kgs.
  Cutting Tolerance	≤±2.5mm ( length≤ 5000mm) ; ≤±3mm ( 5000mm < length ≤ 10000mm)
  Voltage	380V, 3 phase, 60HZ
  Numbers of Stations	17 stations
  Type of Cutting	Stop to Cutting, Post Cut, no blanking cut

• 3. Material of Main Equipments

• Roller Material	GCr15 bearing steel, with quenching treatment.
  Active Shaft Material	High grade No.45 carbon wrought steel,which can improve the integrated mechanic feature of the shaft. Diameter of shaft is 80mm
  Electric Elements	PLC control console, touch screen and transducer, from Mitsubishi, Japan. Other elements, from Schneider, China
  Cutter Blades	Cr12 mould steel with quenching treatment
  Punching Die	Cr12 mould steel with quenching treatment

• 4.Standard Equipment of Machine

• 1)	Hydraulic Uncoiler, 4tons	1 set
  2)	Infeed Guide	1set
  3)	Straightening Device	1set
  4)	Hole Punching Device	1set
  5)	Pre-cut Device	1set
  6)	Roll Forming Station	1set
  7)	Rectification Device	1set
  8)	Hydraulic Station	1set
  9)	PLC Control Console	1set
  10)	Product Support Table	2 sets
  11)	Other Spare Parts	several

• 
•