1.Components of the Machine:
The roll forming machine consists of 8-ton manual uncoiler, infeed guide, fixed position driven forming stations, cutting equipment, hydraulic station, control console, and manual unload product run out table.
2.Technical Parameters:
Material specification |
Aluzinc steel and galvanized steel. |
Thickness |
0.8 mm to 1.5mm. |
Main motor power |
18.5 kw. |
Hydraulic station power |
4 kw. |
Yield stress |
235Mpa (33KSI) ~ 350Mpa (50KSI). |
Roll forming speed |
12 m/minute. |
Cutting tolerance |
+/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm). |
Manual uncoiler |
Max. Capacity: 8'000kgs. |
Voltage |
As per customer's request. |
Numbers of stations |
25 stations. |
Type of cutting |
Roll-formed and length-set profile cutting. |
3.Material of Main Equipment:
Roller Material |
High grade S45C forged steel, coated with hard chrome. |
Active Shaft Material |
High grade S45C carbon wrought steel, diameter 85mm. |
Electric Elements |
PLC control console, touch screen and transducer, from Mitsubishi, Japan.
Other elements, from Schneider Electric, Germany. |
Cutter blades |
Cr12MoV steel with quenched treatment, hardness HRC58~61,
wear-resistance, good steel structure, long life. |
4.Process Sketch:
Uncoiling the shee t; Infeed guiding ; Roll forming ; Measure length ; Cutting the panel ; Panels to the supporter .
5.Standard Equipment of Machine:
1) |
Manual Uncoiler |
1set |
2) |
Infeed Guide |
1set |
3) |
Roll Forming Station |
1set |
4) |
Post-cut Equipment |
1set |
5) |
Hydraulic Station |
1pc |
6) |
PLC Control Console |
1pc |
7) |
Product Support Table |
2pcs |
8) |
Spare Parts |
1box |