| Customization: | Available |
|---|---|
| Controller: | PLC |
| Total Weight: | About 18000kg |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Material specification | Aluzinc steel and galvanized steel. |
| Thickness | 0.8 mm to 1.5mm. |
| Main motor power | 18.5 kw. |
| Hydraulic station power | 4 kw. |
| Yield stress | 235Mpa (33KSI) ~ 350Mpa (50KSI). |
| Roll forming speed | 12 m/minute. |
| Cutting tolerance | +/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm). |
| Manual uncoiler | Max. Capacity: 8'000kgs. |
| Voltage | As per customer's request. |
| Numbers of stations | 25 stations. |
| Type of cutting | Roll-formed and length-set profile cutting. |
3.Material of Main Equipment:
| Roller Material | High grade S45C forged steel, coated with hard chrome. |
| Active Shaft Material | High grade S45C carbon wrought steel, diameter 85mm. |
| Electric Elements | PLC control console, touch screen and transducer, from Mitsubishi, Japan. Other elements, from Schneider Electric, Germany. |
| Cutter blades | Cr12MoV steel with quenched treatment, hardness HRC58~61, wear-resistance, good steel structure, long life. |
4.Process Sketch:
| 1) | Manual Uncoiler | 1set |
| 2) | Infeed Guide | 1set |
| 3) | Roll Forming Station | 1set |
| 4) | Post-cut Equipment | 1set |
| 5) | Hydraulic Station | 1pc |
| 6) | PLC Control Console | 1pc |
| 7) | Product Support Table | 2pcs |
| 8) | Spare Parts | 1box |
){kind=link}