Popular Multi Type Embossing Cold Roll Forming Machine
Detailed Product Description
Material spec |
colored steel sheet at stress 33KSI; aluminum sheet |
Steel thickness |
0.2mm ~ 0.4mm |
Aluminum thickness |
0.4~0.8mm |
Coil width: max |
max. 1250mm |
Working speed |
20m/minute |
Run direction |
both directions |
Power requirement |
4 kw |
Machine dimension |
about 1800mm×1500mm×1300mm |
Total weight |
about 3500 kgs |
Voltage |
380V 3 phase 60Hz, or as our customer's requirement |
Size of two center rollers |
dia. 240mm |
Size of upper and bottom rollers |
280mm |
Material of rollers |
40Cr |
Embossed pattern |
orange peel, or diamond shape |
Packaging & Shipping
1.One 20ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film;
3.Spare parts and some small parts packed in plastic tooling box;
4.All Components Fixed by steel wire with Container.
Company
FAQ
Q:Are you a manufacturer?
A:Yes absolutely. Welcome a lot for your visiting to us.
Q:What's the delivery time?
A:Normaly will take 60days
Q:Do you have after-sale support?
A:Yes, we're always here for giving you advice and support for technical details since we have senior technician.
Q:Is there quality control when manufacturing the lines?
A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.
Q:What's your strength comparing to the other supplier?
A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.