|FOB Price:||US $15,000-17,000 / set|
|Min. Order:||1 set|
|Min. Order||FOB Price|
|1 set||US $15,000-17,000/ set|
|Payment Terms:||L/C, T/T, Western Union, Paypal, L/C at sight, T/T (30% deposit, balance before)|
- Model NO.: WLFM
- Driven Type: Hydraulic
- Usage: Paper Printer
- Automatic Grade: Automatic
- Coil THK: 0.3~0.5
- Roller of Pressure Roller: 300mm
- Shaft Dia.: 80mm
- Roller Material of Embossing Roller: 40cr
- Embossing Depth of Max THK: 0.1mm
- Trademark: WILLINGIN′T
- Specification: CE& ISO9001
- Type: Steel Glazed Tiles
- Color & Page: Multicolor
- Computerized: Computerized
- Application: Artificial Leather, Paper, Coating, Aluminum, Non Woven, Fabric
- Coil Width: 1250
- Roller of Embossing Roller: 280mm
- Roller Material of Pressure Roller: #45
- Embossing Depth of Min THK: 0.5mm
- HRC: 55-60
- Transport Package: Wooden Cases
- Origin: China
1) uncoiler with 5 tons;
2) pinch roller,
3) cut to length system,
4) encoder which cut automatically, and controlled by PLC (Mitsubishi brand).
5) product support table,
1)Today we checked with our engineers, they said we could make the working speed in your requirement --- 7.5tons/ hour. We can make the improved type of this machine. But the machine frame will be changed accordingly; meantime the cost of machine will be increased.
For 7.5 tons/ hours, 7500 kgs / 60 minutes = 125 kgs/ minute, if you use 0.5mm thick steel coil, 125 / density 7.85 / width 1 / thickness 0.5= 31.8 m; therefore, you mean 31.8m / minute, all right? We have confirmed with engineers, they said we could frabricate this speed type.
But we need hydraulic(powered) decoiler for 5 tons now, we can't use passive / manual / unpowered decoiler. Then we could meet the speed of 7.5 tons/ hour.
2)But notice, it still has shortage, if speed up, the thickness of cutting only can be min. 0.20mm, not like yours 0.13mm. So our range of cutting is 0.20~0.80mm.
As to 0.13mm thick steel sheet, we can cut, but not guarantee quality. Supposing you cut steel sheet lower than 0.20mm, the cutting blades need to maintain it usually, ward off wear and tear. The precision of cutting should be very high. You need employ a very good technician to take care of this machine as well, if you cut lower than 0.20mm.
We suggest you use 0.20~0.80mm this range. Speed 7.5 tons/ hour, we are sure we could make it, you could inspect the machine after finished.
3)Price of machine: 1) regular type: 18m/ minute, 0.25~0.80mm, USD 15,000 per complete set, FOB Shanghai (unpowered uncoiler).
2) improved type: 35m/minute, 0.20~0.80mm, USD 17,000 per complete set, FOB Shanghai (unpowered uncoiler).
35m/minute, 0.20~0.80mm, USD 27,000 per complete set, FOB Shanghai (powered uncoiler, type 5tons, no coil car).
About the machine,we need you to provide us informaton.
1. profile drawing and size of product (model),
2. steel thickness range,
3. coil width,
4. steel stress,
5. requirements for configuration.
Please Contact Miss. Lucy