High Quality 10 Tons Hydraulic Decoiler

• Customization: Available
• Delivery Time: Two Weeks
• Container Load: to Do LCL(Less Than One 20FT Container Load)
• Model NO.: as to your request
• Feeding Width: :Maximum 600mm
• Capacity: :Maximum 3 Tons
• Inner Diameter: 508mm or 610mm
• Working Mode: Inner Axis Can Be Expanded &Shrank, Controlled by
• Port of Shipment: Shanghai or Ningbo, China
• Transport Package: Packing with Protection Foaming
• Specification: 3 Tons
• Trademark: WILLINGINT
• Origin: China
• HS Code: 84559000
• Production Capacity: 150 Sets Per Month

Product Description

1.Technical Parameters for Hydraulic Decoiler
For lifting dolly (coil car)
1) Capacity: see the type of uncoiler, max. 10 tons.
2) Speed: 6m/ min.
3) Lifting Height: max. 550mm.
4) Moving Distance: max. 3000mm.
 
For decoiler
1) Capacity: see the type of uncoiler, max. 10tons.
2) Inner dia: 508mm, and 610mm (gasket is required).
3) Width: max. 1500mm.
4) Center shaft adjust: max. 250mm.
5) Equipped with optical sensor, laid before decoiler, if sheet is close to sensor, it will stop releasing coil sheet; if sheet leaves sensor, the decoiler will release coil sheet.
 
For hydraulic
1) Max. hydraulic pressure: 16 Mpa.
2) Motor power: 10.5 KW.
3) Air pressure: 0.9 Mpa.
 
2.Work Flow
Fix coil to the decoiler ---- fix coil sheet to lifting dolly ---- lifting dolly moves to decoiler --- lifting dolly lifts to the same center with decoiler ---- lifting dolly moves more closely to arms of decoiler---- expanse (coil moves to the decoiler) ---- lifting dolly returns ---- axis of decoiler rotate (coil sheet comes out).
 

3.Port of Shipment: Shanghai or Ningbo, China. 
4.Port of Destination: as per customer's request. 
5.Delivery time: at least 30days.  
6.Terms of Payment: 1) 30% for down payment by T/T; 70% for balance by T/T before shipment.
2) 100% Irrevocable L/C at sight.
 
7.Shipping Documents:
1) Bill of Lading, one full set;
2) Commercial invoice, triplication,
3) Packing list, triplication.
 
8. Insurance: covered by the buyer.
9.Guarantee Period: 12 months after custom cleared in buyer's site.






 

FAQ

1. Q:Are you a manufacturer?
2. A:Yes absolutely. Welcome a lot for your visiting to us.

3. Q:What's the delivery time?

   A:Normaly will take 60days

4. Q:Do you have after-sale support?

   A:Yes, we're always here for giving you advice and support for technical details since we have senior technician. 

5. Q:Is there quality control when manufacturing the lines?

   A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.

6. Q:What's your strength comparing to the other supplier?

   A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.