C/Z Changeable Purlin Production Line

• Customization: Available
• Certification: CE, ISO9001
• Customized: Customized
• Model NO.: WLFCZ
• Control Type: Artificial
• Automatic Grade: Automatic
• Material Spec: Galvanized Steel and Carbon Steel
• Thickness: From 2.0 mm to 3.0mm
• Electric Elements: PLC
• Main Otor Power: 18.5 Kw
• Hydraulic Station Powe: 5.5 Kw
• Roll Forming Speed: 12 M/Min
• Hydraulic Uncoiler: Max. Capacity Is 4 Tons
• Coil Inner Diameter: 508mm
• Type of Cutting: Stop to Cutting, Post Cut, No Blanking Cut
• Voltage: 1380V, 3phase, 50Hz; or as Per Customer′s Require
• Specification: CE Standard, ISO9001
• Trademark: WILLING INT′ L
• Origin: China
• HS Code: 84552210
• Production Capacity: 150 Sets Per Year

Product Description

• Model NO.: WLFCZ
• Certification: SGS, CE, ISO
• Condition: New
• Customized: Customized
• Transmission Method: Machine
• Max. Roll Forming Speed: 12m/Min.
• Hydraulic Power: 5.5 Kw
• Main Motor Power:18.5Kw
• Export Markets: Global


• High Quality C Shape Steel  Roll Forming Machine
  
  1. Components for the sheet profiling machine
  The roll forming machine includes 4tons manual uncoiler unit, sheet guiding equipment, straightening device, pre-punching device, roll forming system, cutting equipment, hydraulic station, electric controlling system(PLC) and run out supporting table.
• 
  2. Technical Parameters

• Material specification	galvanized steel and carbon steel
  Thickness	2.0mm to 2.5mm
  Main Motor Power	18.5 kw
  Hydraulic Power	5.5 kw
  Web Width	Changeable
  Yield stress	235Mpa (33KSI) ~ 345Mpa (50KSI)
  Roll Forming Speed	12m/minute
  Manual Uncoiler	Max. capacity: 4000kgs
  Cutting Tolerance	≤±2.5mm ( length≤ 5000mm) ; ≤±3mm ( 5000mm < length ≤ 10000mm)
  Voltage	380V, 3 phase, 50HZ; or as per customer's requirement
  Numbers of Stations	17 stations , with 4+5 straightening rollers
  Type of Cutting	Roll-formed and length-set profiled cut

• 3. Material of Main Equipments

• Roller Material	GCr15 bearing steel, with quenching treatment.
  Active Shaft Material	High grade No.45 carbon wrought steel, diameter of shaft is 80mm.
  Electric Elements	PLC control console, touch screen and transducer, from Mitsubishi, Japan. Other elements, from Schneider, Germany.
  Cutter Blades	Cr12MoV steel with quenched treatment, hardness HRC58~61, wear-resistance, good steel structure, long life.
  Punching Die	Cr12 mould steel with quenching treatment

• 4.Standard Equipment of Machine

• 1)	Hydraulic Uncoiler, 4tons	1 set
  2)	Infeed Guide	1set
  3)	Straightening Device	1set
  4)	Hole Punching Device	1set
  5)	Pre-cut Device	1set
  6)	Roll Forming Station	1set
  7)	Rectification Device	1set
  8)	Hydraulic Station	1set
  9)	PLC Control Console	1set
  10)	Product Support Table	2 sets
  11)	Other Spare Parts	several

•  
  
•  
  
•  
•